Filter
Top Products
26 Graphics contained within this publication are for representation only. Your unit might differ slightly.
Chapter 3: Playing Discs (Audio CDs)
Using the Repeat Feature
By default Repeat feature is Off. There are three Repeat options:
• Disc – repeats the title that is playing
• Track – repeats the chapter that is playing
• A-B – repeats a segment of the disc that you select.
Repeating Discs or Tracks
1. While a disc is playing, press INFO (the Info Display appears).
2. Press the right arrow button until the Repeat icon is highlighted.
3. Press the up or down arrow button to scroll through the different Repeat options — repeat disc, repeat track, repeat AB, and repeat off (the
modes will appear at the bottom of the Info Display).
4. To turn off the Repeat feature, press the up or down arrow button repeatedly until Repeat Mode: Off appears.
AB Repeat
AB Repeat lets you define a specific segment on the disc that you want to repeat. For example, you might want to listen to the same segment of a
song over and over.
1. Follow steps 1 and 2 above.
2. Press the up (or down) arrow button until Repeat Mode: AB is displayed. Press OK to set A point appears at the bottom of the Info Display.
Press OK when the disc gets to the beginning point of the segment (the A point) that you want to repeat.
3. Allow the disc to play to the end of the segment you want to repeat. Don’t fast forward — you must let the disc play in standard playback mode
to set the B point (the ending point of the segment). Press OK to set the B point (the segment you marked will play repeatedly until you turn
off the Repeat feature).
4. To turn off the Repeat feature, highlight the Repeat icon, and press the up arrow button on the remote until Repeat Mode: Off appears at the
bottom of the Info Display.
Note: Repeat is also cancelled when you eject the disc from the player.
15909540 FINAL 7/25/02 8:11 AM Page 26