Filter
Top Products
6
Chapter 1: Setup and Connections
Both Dolby Digital® and DTS® are audio formats used to
record 5.1-channel audio signals onto the digital track of
film (while the film is being made). Both of these formats
provide up to six separate channels: left, right, center, left
rear, right rear, and common subwoofer. The disc will play
5.1-channel sound only if you’ve connected a DTS or Dolby
Digital receiver or decoder and if the disc is encoded in the
Dolby Digital or DTS format.
Please Read This Before Using the DIGITAL AUDIO OUT Jack!
This player’s digital output jack is designed for a
connection to a Dolby Digital or DTS receiver or decoder.
Older digital equipment may not be compatible with the
Dolby Digital bitstream. Such a connection can create a
high level of noise that may be harmful to your ears, and
could damage headphones or speakers. It is important to
choose the correct Digital Output setting in the DVD
Player’s Sound menu, especially when you use either of the
DIGITAL AUDIO OUT jacks. For more information, go to
page 42.
Manufactured under license from Dolby Laboratories. “Dolby” and the
double-D symbol are trademarks of Dolby Laboratories. Confidential
unpublished works. © 1992-1997 Dolby Laboratories, Inc. All rights
reserved.
DTS is a registered trademark of Digital Home Theater Systems, Inc.
Connection: DVD + TV + Audio Receiver
OPTICAL
S-VIDEO
R
L
AUDIO OUT
VIDEO
OUT
DIGITAL AUDIO OUT
COAXIAL
VIDEO
AUDIO
L R
S-VIDEO
CABLE/ANTENNA
Back of TV (example)
Back of DVD Player
Back of Receiver (example)
COAXIAL
CABLE
OR
OFF-AIR SIGNAL
Graphics contained within this publication are for representation only. Your unit might differ slightly.
15909540 FINAL 7/25/02 8:11 AM Page 6