Filter
Top Products
Operating Instruction Book
TU-HDT104A
10
Mode B (HD, RGB)
The switch on the rear of the digital
receiver must be in position B, and the
AV connections must be taken from
the RGB HD15 socket. The digital
receiver display will show “Hd r”.
Press OK to confirm the selection, or
switch to another mode. Proceed to
INSTALLATION.
Mode C (SD, CVBS)
The switch on the rear of the digital
receiver must be in position C, and the
AV connections must be taken from
the CVBS TV RCA socket. The digital
receiver display will show “Sdtv”.
Press OK to confirm the selection, or
switch to another mode. Proceed to
INSTALLATION.
Installation
The on-screen display will ask which type
of display device is being used. You will
have a choice of either Plasma / LCD (Flat
panel displays) or CRT (eg Standard
television).
Select from the choices using the remote
control keypad. The following screen will
ask you to confirm 576i / 576p (depending
upon the current mode). Follow the on-
screen instructions to test HD576p,
HD1152i, HD1080i and HD720p formats.
Note: Not all video formats are available in all modes. The following table describes
the available formats in each mode.