Filter
Top Products
Operating Instruction Book
TU-HDT104A
11
Table 1: Output format table
When all formats have been tested, a list of all accepted video formats will be
displayed. You will have the option to accept this list or to start the procedure again.
The accepted display formats are then
displayed and you are requested to select
your preferred display format, or to select
Dynamic Format Selection. When Dynamic
Format Selection is selected, the digital
receiver will choose the best format for the
received digital program. The selected
output format can be changed at any stage
in the Preferences menu (section 6.3).
Anytime you change the rear panel switch or change display device, you will have to
restart the procedure again.
4.3 Audio Display setting
During the format set up, if you select
Plasma / LCD as the display type, your
digital receiver will ask you to set up Lip
Sync Compensation. Generally speaking,
Plasma Display Panels introduce a slight
time delay in the picture, which may cause
a problem with lip sync. Use S/T on the
remote control to select the delay and
confirm by pressing OK. Typically this
delay is in the order of 20 – 40 ms. You
can adjust the delay later in the
Preferences menu (section 6.3).
4.4 Select Region
The first time the digital receiver is installed, or after Shipping Condition is restored
(section 6.4), you will be asked to select relevant region in order that the digital
receiver may display the correct local time.
HD (YPbPr) HD (RGB) SD (CVBS)
LCD/Plasma CRT LCD/Plasma CRT LCD/Plasma CRT
576i X X X X
576p X X X X
1080i X X X X
1152i X X
720p X X