Filter
Top Products
36
Press the button to display the Satellite List Box. The Satellite name list is put in
alphabetical order. Select one of the preprogrammed satellites that correspond to the value
of the antenna. If the desired satellite name is not in the list, then select
Others
.
A. Satellite Name
There are 4 search modes,
Auto
,
Manual
,
Advanced
and
SMATV
. The
Auto
mode enables to search using the information the PVR has. On the other hand, there
will be a need to know in advance the frequencies and the symbol rates before using the
Manual
mode. On the
Advanced
mode, enter the Audio PID, Video PID or the PCR
PID. The
SMATV
mode is used to special purposes on satellite master antenna TV
system.
Enter the Transponder’s Frequency by using the numeric buttons on your RCU.
Enter the Transponder’s Symbol Rate by using the numeric buttons on your RCU.
Choose the type of polarization, either the
Horizontal
or the
Vertical
.
This
Network Search
item can be used if the
Search mode
is set to the
Manual
or
Auto
mode. If the
Network Search
item is set to
On
and the NIT
(Network Information Table) is available, the Transponder’s information can be found.
Press button to enter Video,Audio and PCR PID’s.
1) Video PID
Insert the Video PID by using the numeric buttons on your RCU.
2) Audio PID
Insert the Audio PID by using the numeric buttons on your RCU.
C. Frequency
D. Symbol Rate
E. Polarization
F. Network Search
B. Search Mode
G. PID