Filter
Top Products
58
Repeat mode
The repeat mode works only in playback mode. It does not work in time shifting mode.
There are two repeat modes.
1. Repeating the whole selected service.
a. Start playback a recorded service.
b. Press button without the progress bar to repeat the whole selected service.
c. Press button once more to cancel the repeating playback.
2 Repeating the selected region.
a. Start playback a recorded service.
b. Press button to display
Playback progress
bar.
c. To specify one end of region, press the button with the progress bar.
d. Move the cursor by pressing (or ) or (or ) button.
e. To specify the other end of region, press the button once more.
f. Press button once more to cancel the repeating playback.
1. With
Separated
mode in
LNB setting
menu.
For the tuner being recorded with, all the channels in the same TP can be selected.
For the other tuner, all the scanned channels can be selected.
2. With
Loop Through
mode in
LNB setting
menu.
For the tuner being recorded with, all the channels in the same TP can be selected.
For the other tuner, all the channels of the same polarity and the same band as being
recorded channel can be selected.
Zapping while Recording