Filter
Top Products
22
Parental control
By setting a security code, a PIN, you can use the Censorship and Locked Services options to prevent the
viewing of certificated digital films and digital programmes.
Setting up Parental Lock
Press the DTV MENU button to bring up the
digital MAIN MENU.
To enable the Parental Control options, you need to
first set up a security code, a PIN.
2
1
Highlight Setup and SELECT.
And press the SELECT button.
The factory setting is 1234. You must enter this
number first using the numbers on the remote
control before proceeding.
You will now be able to choose your own PIN. In
the Parental Control menu use the
Q
button to
highlight Change PIN. Press SELECT.
Now with the number buttons on the remote
control, put in four numbers that you choose to be
your PIN. You need to enter the same four
numbers to Confirm New PIN and you will then
see the options available for Parental Control.
YOU WILL NEED YOUR PIN IF YOU WISH TO
UNLOCK A PROGRAMME OR TO RUN AUTO
TUNE AGAIN.
3
4
5
6
7
digital Parental Lock
MAIN MENU
Up/Down
Enter
Timer Programming
Favourite List
Service List
Common Interface
Setup
CHANGE PIN
Enter New PIN – – – –
Confirm New PIN – – – –
SETUP MENU
Up/Down
Enter
PARENTAL CONTROL
Use 0 – 9
Please enter PIN
Languages
Modem
Parental Control
Auto Tune
Manual Tune
Check For Download
Technical Information
* * * *
ADDITIONAL FEATURES
Use 0 – 9
With the
P
or
Q
button highlight Parental
Control.
Remember
to make a
note of your
number. You
will need it if
you want to
change your
PIN.
!