Filter
Top Products
5
SETTING UP
Connecting the speakers
When connecting external speakers always make sure that the power is OFF.
In order to enjoy the full benefits of Surround Sound it is necessary to connect two rear surround speakers
and two front extension speakers.
When connecting external front Hi-Fi speakers, they must be 8 ohm, 10W minimum and the rear
Surround speakers must be 8 ohm, 10W minimum.
The front speakers should be positioned either side of the TV and will deliver the left and right sound. The
internal speakers will then deliver the centre channel required to enjoy Dolby Digital.
Surround Speakers
External (Main) Speakers
Active Woofer
TV
External
(Main) Speaker
External
(Main) Speaker
Surround
Speaker
Surround
Speaker
WARNING: do not
attempt to share
external speakers with
your Hi-Fi as serious
damage may occur.
!
Don’t
forget to set
the switch
to EXT.
☛
When you
connect a Woofer,
make sure you
choose
Woofer
EXT.
in the
AV
Connection
menu.
☛
These are suggested
positions only.
Place your speakers to
suit and adjust the
balance as necessary.
☛
In order to enjoy the sensations of Surround
Sound TV it is necessary to connect the two
Surround Speakers. These speakers and cables
are supplied and should be sited in line with
the normal viewing position. To connect the
Surround Speakers simply press the connector
and insert the cable.
Always make sure
that the lead with the
stripe (or raised edge) is
connected to the RED
terminal and the other
(smooth) lead is
connected to the
BLACK terminal.
!