Filter
Top Products
36
Connections and controls
CONNECTING EQUIPMENT
When plugging
accessories into
ANY socket on the
TV, it is imperative
to turn the TV OFF.
!
When connecting
equipment always refer
to the relevant owner’s
manual for full details.
!
DOLBY
DIGITAL
100Hz Dynamic Frame Scan
Progressive Scan
You can connect a wide variety of external equipment via the sockets located behind
the flap on the TV. Press the centre of the flap to open it.
Whilst all the necessary adjustments and controls for your new TV are made using the remote
control, the buttons on the TV may be used for some functions…
If you connect mono sound equipment, connect the audio output of the equipment to the L/Mono socket on the TV.
To select the Inputs, press the
B
button until the display shows EXT3 or EXT3S as described on page 25.
Before connecting any external equipment, turn off all main power switches.
Please note: Inserting the headphone jack will mute the sound from all speakers and deliver a normal stereo left and right signal.
CAMCORDER
COMPUTER GAMES
DIGITAL CAMERA
DIGITAL
CAMERA
HEADPHONES
To bring up the TV menu press
the MENU button. Press the
MENU button twice to EXIT.
To control the TV’s volume and to
move left and right through the
menus press the
+ j —
buttons.
To change programmes and to
move through the menus
press
the
ff
F
ee
buttons.
Press MENU and —
together to
swap to ATV/DTV mode.
28ZT29B – front connections and controls
To bring up the TV menu press
the MENU button. Press the
MENU button twice to EXIT.
To control the TV’s volume and
to move left and right through
the menus press the
+ j —
buttons.
To change programmes and to
move through the menus
press
the
ff
F
ee
buttons.
Press MENU and —
together
to swap to ATV/DTV mode.
32ZT29B and 36ZT29B – side connections and controls
COMPUTER
GAMES
HEADPHONES
CAMCORDER
DO NOT connect equipment
to both the front/side and rear
J
terminals at the same time.
!
The panel lock
function must be off.
!