Filter
Top Products
10
Reference
Connecting
your TV
Connecting a DVD player or satellite receiver
and a VCR
This connection allows you to watch DVD/satellite, VCR, or TV
programs. You can record from the DVD player/satellite receiver and
TV, as well as record one TV channel while watching another channel.
Note: If your DVD player has component video connections, follow
the connection instructions under “Connecting a DVD player with
ColorStream
™
(component video) and a VCR” on page 11.
You will need:
• one coaxial cable
• three pairs of audio cables (one pair and two single audio cables
for a mono VCR)
• two regular video cables
• one S-video cable
ANT (75Ω)
IN
OUT DVD IN
Stereo VCR
DVD / Satellite Receiver
To Satellite
To Antenna
Note:
You can use a regular video cable instead of
an S-video cable between the TV and DVD
player/satellite receiver, but the picture quality
will decrease.
The illustration at left shows one S-video cable
and one pair of audio cables connected to
Video-1 on the TV. Make sure you do not
connect a regular video cable and an S-video
cable to Video-1 (or Video-2) at the same
time. Doing so will distort the picture.