Filter
Top Products
37
Reference
Welcome to
Toshiba
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
Changing the location of the PIP window
With the TV in PIP mode, press LOCATE to change the location of
the PIP window on-screen. Every time you press LOCATE, the PIP
window changes position counter-clockwise.
Freezing the PIP display
With the TV in PIP mode, press STILL to freeze the PIP display. The
PIP picture becomes still and is outlined in red on-screen. Press
STILL again to restore the moving picture (outlined in green).
Still
Watching multi-window PIP
Multi-window PIP appears as six small boxes across the bottom of the
screen. The multi-window PIP displays only the channels you
programmed into the TV’s memory (see “Adding channels to the TV’s
memory” on page 24).
Note: The LOCATE, SWAP, PIP CHANNEL
yz, SOURCE,
and STILL buttons do not function in multi-window PIP mode.
To view multi-window PIP:
Press INFO.
The TV cycles through all of the programmed channels, showing a
few seconds of each channel’s programming, and then freezes the
image and moves on to the next channel in a continuous cycle. The
channel number appears above each small PIP window.
A
14 23 27 30 43 56
To turn multi-window PIP off:
Press INFO again or change the channel.
Note:
Multi-window PIP displays channels
programmed for the signal source you are
currently viewing (ANT-1 or Cable). See
“Adding channels to the TV’s memory” on
page 24.
If V-Chip blocking is enabled when you view
multi-window PIP, the channels exceeding the
rating limits will appear as a black window
with a red “X.”
PIP Channel
y/z
SWAP
LOCATE
SOURCE
STILL
PIP
CHANNEL
y/z
AM/FM
DISC
INFO