Filter
Top Products
22
Using the
Remote Control
Learning about the remote control
Only the buttons that are used to operate the TV set are described
here.
POWER turns the TV on or off
SLEEP sets the TV to turn off at a specific time (page 39)
LIGHT The initial press of the LIGHT button causes two actions:
1) enables the illumination mode
2) illuminates the keypad.
Subsequent presses of the LIGHT button cause the Illumination
mode to toggle between enabled and disabled. Any keypress
illuminates the keypad for 5 seconds.
If in programming mode, the keypad will remain lit for 10
seconds.
When disabled, pressing the LIGHT button enables the illumina-
tion mode and lights the keypad.
Channel Numbers (0-9, 100) allow direct access to channels (pages 24, 25)
MODE cycles through the 6 device modes (TV, CABLE/SAT, VCR,
DVD, AUDIO1, AUDIO2).
MENU/ENTER allows access to programming and sets programming
menu information (page 23)
yz x • selects or adjusts programming menus (page 23)
x • (FAVORITE) selects your favorite channels (page 26)
VOL yz adjusts the volume level
EXIT sets programming menu information and exits programming
menus (page 23)
CH yz cycles through programmed channels (page 24)
CH RTN (Channel Return) returns to the last viewed channel (page 26)
RECALL displays on-screen information(page 39)
MUTE mutes the sound (page 41)
INPUT selects video input source (page 24)
PIP Buttons allow access to PIP functions (page 36)
PIP turns the PIP on and off
PIP CH yz selects the PIP channels
INFO allows access to the Multi-Window function
STILL freezes the PIP display
SOURCE selects the PIP source
LOCATE changes the location of the PIP window
SWAP switches the PIP and main pictures
AM/FM
DISC