Filter
Top Products
24
Setting up
your TV
Selecting the signal source
Use the INPUT button on the remote control (or the TV/VIDEO button
on the TV) to monitor or change the signal source connected to your TV.
To monitor the signal source:
Press INPUT (or TV/VIDEO) once. The current signal source
displays in green.
To change the signal source:
Repeatedly press INPUT (or TV/VIDEO) to select either VIDEO 1,
VIDEO 2, VIDEO 3, ColorStream, ANT 1, or ANT 2. The selected
signal source displays in green.
TO SELECT PUSH TV/VIDEO
VIDEO 1
VIDEO 2 ANT 1
VIDEO 3
ColorStream ANT 2
Watching video input
To view a signal from other devices connected to your TV
(such as a VCR or DVD player):
Repeatedly press INPUT on the remote control (or TV/VIDEO
on the TV) to select either VIDEO 1, VIDEO 2, VIDEO 3, or
ColorStream. (For device connections, see “Connecting your TV”
on page 8).
Adding channels to the TV’s memory
When you press CHANNEL ▲/▼ on the TV or remote control,
the TV stops only on the channels stored in the TV’s memory.
Note: To tune the TV to a channel not programmed in the TV’s
memory, use the CHANNEL NUMBERS on the remote control.
Follow the steps below and on the next page to program channels into
the TV’s memory.
Programming channels automatically
Your TV can automatically detect all active channels in your area and
store them in the TV’s memory. After the channels are stored automati-
cally, you can manually add or erase individual channels (see page 25).
If you use both ANT-1 and ANT-2 terminals, you will need to program
channels for each input source.
To program channels automatically:
1. Press MENU.
2. Press
x or • to highlight the SET UP menu.
3. Press
y or z to highlight TV/CABLE.
4. Press
x or • to highlight TV (if you use an antenna) or CABLE (if
you use cable).
5. Press
z to highlight CH PROGRAM.
MOVE SELECT
[
]
[
]
LANGUAGE:
ANT1/2:
TV/CABLE:
CH PROGRAM
ADD/ERASE:
MORE
[ENGLISH]
FRANCAIS ESPANOL
[ANT1] ANT2
[TV] CABLE
[ADD] ERASE
SET UP
MOVE SELECT
[
]
[
]
LANGUAGE:
ANT1/2:
TV/CABLE:
CH PROGRAM
ADD/ERASE:
MORE
[ENGLISH]
FRANCAIS ESPANOL
[ANT1] ANT2
[TV] CABLE
[ADD] ERASE
SET UP
MENU
yzx •
EXIT
INPUT
CHANNEL
NUMBERS
MENU
yzx •
TV/VIDEO
CHANNEL
yz
MENU TV / VIDEO VOLUME CHANNEL POWER
CHANNEL
y /z