Filter
Top Products
23
Reference
Welcome to
Toshiba
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
Setting up your TV
After you have installed the batteries and programmed the remote
control, you will need to set some preferences on your TV using the
menu system. You can access the menus using the buttons on your TV
or remote control.
• When you make a menu selection, your changes occur immediately.
You do not have to press MENU or EXIT to save your changes.
Note: The TV front panel does not have an EXIT button.
• When you are finished programming the menus, you can press
EXIT to clear the on-screen display, or wait 15 seconds and the
on-screen display will disappear automatically. Your changes are
automatically saved either way.
Changing the on-screen display language
You can choose from three different languages (English, French, and
Spanish) for the on-screen displays of menus and messages.
To select an on-screen display language:
1. Press MENU .
2. Press
x or • until the SET UP menu appears.
3. Press
y or z to highlight LANGUAGE.
4. Press
x or • to highlight your desired language.
MOVE SELECT
[
]
[
]
LANGUAGE:
ANT1/2:
TV/CABLE:
CH PROGRAM
ADD/ERASE:
MORE
[ENGLISH]
FRANCAIS ESPANOL
[ANT1] ANT2
[TV] CABLE
[ADD] ERASE
SET UP
BOUGER CHOISIR
[
]
[
]
LANGUE:
ANT1/2:
TV/CABLE:
PROGRAMME CAN
ADD/EFF:
MORE
ENGLISH
[FRANCAIS] ESPANOL
[ANT1] ANT2
[TV] CABLE
[ADD] EFF
CONFIGURE
Selecting the antenna input
You can connect to one of two different antenna input sources using
the antenna input (ANT 1 or ANT 2).
To select the antenna input:
1. Press MENU .
2. Press
x or • to highlight the SET UP menu.
3. Press
y or z to highlight ANT 1/2.
4. Press
x or • to highlight either ANT 1 or ANT 2, depending on
the antenna terminal you wish to use.
MOVE SELECT
[
]
[
]
LANGUAGE:
ANT1/2:
TV/CABLE:
CH PROGRAM
ADD/ERASE:
MORE
[ENGLISH]
FRANCAIS ESPANOL
[ANT1] ANT2
[TV] CABLE
[ADD] ERASE
SET UP
MENU
yzx •
EXIT
MENU
yzx •
TV Front Panel
MENU TV / VIDEO VOLUME CHANNEL POWER