Filter
Top Products
22
Using the TV’s features (General)
Sound adjustment
Setting the MTS (Multi-channel TV Sound)
- analog only -
Auto mode
The MTS Auto mode automatically recognize stereo/bilingual
programs depending on the broadcast signal.
1 Press M, then press Y or Z to display the SOUND
menu.
2 Press V or U to select MTS, then press Y or Z to select
Auto or Mono.
Mono mode
If you experience noise or poor reception of any stereo/
bilingual program, set the MTS mode to Mono.
Noise will be reduced and reception may improve.
Note:
If you experience noise with a particular program on whose
channel reception is usually good, try setting MTS mode to
Auto, then switch S to e Mono (monaural) (- page 22).
Selecting the dual 1 or dual 2 mode
- analog only -
You can hear only dual 1 or dual 2 sound selected, whenever
bilingual programs are received.
1 Press M, then press Y or Z to display the SOUND
menu.
2 Press V or U to select Dual, then press Y or Z to select
Dual 1 or Dual 2.
Notes:
• When the MTS setting is in Mono mode, the Dual menu is
not selectable.
• The Dual menu setting status remains even if the TV is
turned off.
Selecting the stereo programs - analog only -
1 When a stereo program is received, d Stereo appears.
2 Press S to select the stereo/monaural mode. d Stereo
and e Mono appear cyclically on the screen.
Selecting the bilingual programs - analog only -
1 When a bilingual program is received, j Dual appears.
2 Press S to select the sound to be heard. The sound
differs according to the transmission system: NICAM or
German stereo/bilingual broadcast.
Note:
These settings are not stored in the TV memory.
Adjusting the sound quality
1
From the SOUND menu, press V or U to select an item
you want to adjust.
2 Press Y or Z to adjust the settings as required.
Dual
MTS
SOUND 1/2
MENU
BackWatch TV
EXIT
Auto
Dual 1
Treble
Bass
0
0
0
Balance
WOW
OK
Stereo
Display
Sound to be heard
NICAM
German stereo/
bilingual broadcast
j Dual 1 Sub I sound Main sound
J Dual 2 Sub II sound Sub sound
e Mono Main sound —
Selection Y Pressing Z
Bass weaker stronger
Treble weaker stronger
Balance decreases the right
channel
decreases the left
channel
Dual 1
Bass 0