Filter
Top Products
35
Connecting your TV
Side connections
You can connect a wide variety of auxiliary equipment via the
terminals located on the right side of the panel o (2).
Please always refer to the owner’s manual of the equipment to
be connected for full details.
Connection example
• To select the side inputs, press o to display the video input
mode list, then press V or U to select o2 (- page 25),
then press Q.
• Before connecting any external equipment, turn off all main
power switches.
• If you connect both of the S-VIDEO input terminal and
VIDEO input terminal, the S-VIDEO signal will appear on
the screen (display changes to o 2S).
• If you connect mono sound equipment to o (2), connect the
audio output of the equipment to the L/MONO jack on the
TV.
• You can enjoy Video Games with this TV. However
shooting games, where the player shoots at a target on the
TV screen with a light gun, may not work because of the
LCD Color TV properties.
Connecting an HDMI or a DVI device
• When turning on your electronic components, turn on the
TV first, and then the HDMI or DVI device.
• When turning off your electronic components, turn off the
HDMI or DVI device first, and then the TV.
• This TV may not be compatible with features and/or
specifications that may be added in the future.
• This TV is only operable with L-PCM on 32/44. 1/48 kHz
and 16/20/24 bits. If there is no sound when using HDMI,
use the analog audio cables to connect the TV and the HDMI
device, and select Analog in HDMI1 audio of the AV
connection menu (- page 36)
.
Connecting an HDMI or a DVI device
The HDMI input on your TV receives digital audio and
uncompressed digital video from an HDMI device or
uncompressed digital video from a DVI device.
This input is designed to accept HDCP program material in
digital from EIA/CEA-861/861D compliant consumer
electronic devices (such as a set top box or DVD player with
HDMI or DVI output).
The HDMI input is designed for best performance with 1080i
(50 Hz/60 Hz), 1080p (50Hz/60Hz) high-definition video
signals, but will also accept and display 480i, 480p, 576i, 576p,
720p (50 Hz/60 Hz) and VGA signals.
• HDMI: High-Definition Multimedia Interface
• DVI: Digital Video Interface
• HDCP: High-bandwidth Digital Content Protection
• EIA/CEA-861/861D compliance covers the transmission of
uncompressed digital video with high-bandwidth digital
content protection, which is being standardized for
reception of high-definition video signals. Because this is an
evolving technology, it is possible that some devices may
not operate properly with the TV.
• E-EDID: Enhanced-Extended Display Identification
• VGA: VESA 640 5 480 @ 60 Hz
• L-PCM: Linear-Pulse Code Modulation
TV right side view
Video Games
Camcorder Camcorder with
S-Video