Filter
Top Products
31
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
(E) 56/62/72MX195
Using the remote control
3
Note: The error message “Not
Available” will appear if you press a
key for a function that is not available
The buttons used for operating the TV only are described here. For a
complete list of the remote control’s functions, see the remote control
functional key chart on pages 29–30.
For a list of the buttons that operate the TV Guide On Screen
™
system, see
page 54.
POWER
turns the TV on and off. Press POWER to turn on the TV. The blue
LED indicator on the TV front will be illuminated. Press POWER again to
turn off the TV.
Note: The Quick Restart setting will affect the amount of time it takes for the
picture to appear when you turn on the TV. See page 51 for details.
SLEEP
accesses the sleep timer (page 94).
LIGHT
The first press of the LIGHT button lights the keypad and turns on
the Illumination mode. With the Illumination mode on, pressing any key
lights the keypad for 5 seconds (10 seconds if you’re in programming
mode). Subsequent presses of the LIGHT button toggle between turning
the Illumination mode on and off.
Channel Numbers (0–9, –/100)
directly tune channels. The “–” button is used
to tune digital channels (page 71) or to display the favorite channel list
(page 44).
INPUT
selects the video input source (page 67).
MODE
cycles through the six remote control device modes: TV, CBL/SAT,
VCR/PVR, DVD, AUDIO1, and AUDIO2. The mode indicator light will
remain lit for a few seconds (page 28).
PIC SIZE
cycles through the five pictures sizes: Natural, TheaterWide 1/2/3,
and Full (page 72).
TheaterNet™ DEVICE
displays a list of available TheaterNet devices (page 45).
TheaterNet™ CTRL
accesses the on-screen IR device control icons (page 46).
MENU
accesses the main TV menu system (pages 35 and 36) or opens a
menu in the TV Guide On Screen
™
system (Chapter 7).
TV GUIDE
opens the TV Guide On Screen
™
system (Chapter 7).
INFO
provides detailed information on highlighted items in the TV Guide
On Screen
™
system (Chapter 7).
ENTER
activates highlighted items in the main menu system and the
TV Guide On Screen
™
system.
Arrow buttons (yz x •)
When a menu is on-screen, these buttons select or
adjust programming menus. (Also see
x / • on the next page.)
CH yz
cycles through programmed channels when no menu is on-screen (42)
and functions as page up/down when a menu is on-screen or when the
TV Guide On Screen
™
system is open (Chapter 7).
Learning about the remote control
(Continued on next page)
#01E_031-039_566272MX195 05.7.11, 9:26 PM31
Black
Downloaded from www.Manualslib.com manuals search engine