Filter
Top Products
Toshiba TRR
4/00, Tecra
Page 21
Tecra 780CDM / 780DVD Disassembly Overview, (cont.)
CAUTION: When you remove the FL, be
careful not to let any dust or other foreign
matter contaminate the LCD panel. Any
contamination can affect the performance of
the unit.
To remove the FL, follow the steps below.
1. Turn off the power to the computer.
Disconnect the AC adapter and all
external cables connected to the
computer.
2. Remove the battery pack, optional PC
card, HDD pack, optional memory
module, modem board, backup and
RTC batteries, keyboard, membrane
switch, top cover with display assem-
bly, speakers, display mask, FL inverter
board, LCD module, and microphone.
3. Remove one strip of tape securing the
FL cable to the LCD frame and lift up
the FL cable.
4. Remove two M2x4 thin-head silver
screws and one M2x2 thin-head
silver screw to remove the metal FL
cover.
5. Carefully lift up the white sheet cover-
ing the FL.
6. Lift the yellow FL cable connector until
one end is out of the groove.
CAUTION: Handle only the FL cable
instead of the FL glass tube to minimize risk
of damage or injury.
7. Lift the white FL cable out of its groove
to remove the cable and FL.
ê
î