Toshiba 8GHO44-88 DVR User Manual


 
39
4.8 Network (Setup for Remote Connections)
The Network Setup allows you to adjust settings such as Ports, IDVR Access.
Disable Remote Control – This setting enables or disables access to the DVR from remote connections.
Quality – Adjusts the resolution quality when transferring video to a remote client.
Resolution – Adjusts the resolution of the images being sent to remote clients. By setting the resolution low,
the images will be sent faster, however, the image quality will be reduced considerably.
Time Out Value – When a user attempts to connect to the DVR and the connection does not succeed during
the timeout period designated, the connection will be terminated.
Emergency Port – The Emergency Port is the port used to connect with the Emergency Agent software. If
connecting through a firewall, this port must be opened to incoming and outgoing traffic.
Center Port – The Center Port is the port used to connect to the Remote Software. This is the Port that must be
specified inside the Remote software to connect to the DVR. If connecting through a firewall, this port must be
opened to incoming and outgoing traffic.
Figure 4.8
1
2
3
4
5
6
1
6
9
2
3
4
5
7
8
13
12
11
Figure 4.8
Network Setup
10