
Disc
Management
Recording
PlaybackIntroduction Connections Basic Setup Editing Function Setup Others
TIMER RECORDING
ints for Timer Recording
PROG. A
PROG. B
actual
recording
PROG. A
PROG. B
When the starting time is the same:
A program set previously (PROG. A) has priority.
The rst 2 minutes (at the longest) will be cut o.
PROG. A
PROG. B
actual
recording
PROG. A
PROG. A
PROG. C
PROG. B
PROG. C
When the starting time and the ending time
for each programs are dierent:
A program that has earlier start time has priority.
The rst 2 minutes (at the longest) will be cut o.
PROG. A
PROG. B
actual
recording
PROG.B PROG.A
When the recording time is partially overlapped:
PROG. A will start after PROG. B is complete to
be recorded.
The rst 2 minutes (at the longest) will be cut o.
PROG. A
PROG. B
actual
recording
PROG. B
When the recording time is entirely overlapped:
PROG.A will not be recorded.
his unit records the programs according to priorit
i
the timer programmings are overlapped. The timer
programming set previous
as priorit
A timer recording o
lower priority will be canceled or start
rom the middle.
heck the overlapped timer programmings and change the priorit
if necessar
If there is a power failure or this unit has been
nplugged for more than 30 seconds, the clock setting
n
a
timer programming wi
e
ost
If
i
i
n
in
r
r if
in
r
i
i
n
recordable (finalized DVD-RW/-R, finalized DVD+RW, a
full
recorded disc, etc.), on the front panel displa
flashes and timer recording cannot be performed. In
some cases
wi
appear momentari
aroun
t
e start
oint as t
e unit attem
ts to recor
. P
ease insert a
r
r
i
• W
en a
t
e timer recor
ing is comp
ete
lashes. To
ay
ac
or eject t
e recor
e
isc, press
I
ON/STANDBY
irst, then select the recorded title and
PLA
OPEN/CLOSE
to remove t
e
isc.
During timer recording or timer standb
mode
ppear), an
operations on the unit will not be available.
o make these o
erations available,
ress
STOP
r
STOP
o stop the timer recordin
or
I
ON
STANDB
to cancel timer standb
mode
ill disa
ear)
• To cance
t
e timer stan
mo
e, press
I
ON/STANDBY
• W
en t
e starting an
t
e en
ing time are t
e same,
“Excee
s 12
ours” appears an
t
e program setting wi
not be acce
ted
• W
en t
e programme
starting an
en
ing time are
ear
ier t
an t
e current time, t
e setting wi
not
e
accepte
• If the startin
time is earlier and the endin
time is later
than the current time, the recordin
will start ri
ht after
I
ON
STANDBY
is
ressed
• “Press ON/STANDBY for timer recordin
” will appear on
the TV screen 5 minutes before the pro
rammed
startin
time
The Priorit
of Overlapped Setting
Note
or DVD recordin
When the recordin
time of 2 pro
rams are overlapped, or
the end time of a pro
ram and the start time of another
pro
ram is the same, the first 2 minutes (at the lon
est) of
the subsequent pro
ram will be cut off
If the cut-off
ortion comes u
to 3 minutes or more, this
program wi
e
isp
a
e
wit
errors num
er E40 in t
e
timer programming
ist
PROG. A
PROG. B
actual
recording
The first 2 minutes (at the longest) will be cut off.
PROG. BPROG. A
When the end time of the programming
currently being recorded and the start time
of the subsequent program are same:
The beginning of the PROG. B may be cut off.