Filter
Top Products
26 EN
INITIAL SETTING
When you turn on this unit for the first time, you need to follow these steps after you have completed all the connections.
3
Use [K / L] to select the desired
channel preset type then press
[ENTER].
Auto Preset will scan all terrestrial channels.
This may take a while to complete.
Initial Setting
Channel Preset
Make sure the antenna is
connected to “ANTENNA IN” jack.
Air
Cable
Cable (Extended Scan)
The unit will start getting channels available in
your area.
Air:
(When using antenna)
The channels broadcasted in TV and DTV are
automatically scanned and memorized. Only the
receivable channels in the area where this TV is
used will be memorized.
Cable:
(When using basic cable)
The channels broadcasted in CATV are
automatically scanned and memorized.
Cable (Extended Scan):
(When using basic cable)
The channels broadcasted in analog CATV and
digital CATV are automatically scanned and
memorized.
Auto Presetting Now
CH 1
If a PBS (public broadcasting station) is available
in your area, clock setting will automatically be
performed and the correct clock will be displayed
following the channel preset procedure.
Initial setting is then completed.
Press [RETURN] to exit.
If a PBS (public broadcasting station) is not
available in your area, press [ENTER]. Then
proceed to step 5 in “Manual Clock Setting” on
page 32.
SE-R0294
OPEN/
CLOSE
INPUT
SELECT
HDMI
.@/: ABC
GHI
PQRS TUV
SPACE
SETUP DISPLAY AUDIO
TIMER
PROG.
DISC MENU
CLEAR RETURN
TOP MENU
WXYZ
JKL MNO
DEF
ENTER
INSTANT
SKIP
PLAY
DVDVCR
PAUSE
REV
SKIP
STOP
SKIP
FWD
1.3x/0.8x
PLAY
TIME SLIP
TIMER SET ZOOMSEARCHREPEAT
RECREC MODEDUBBING
DTV/TV
CH
ENTER
RETURN
1
Press [I/
y
y ON/STANDBY].
Before:
Turn the TV on. Select the input to
which the unit is connected.
2
Use [K / L] to select your desired
language, then press [ENTER] to set
language.
Initial Setting
OSD Language
English
Français
Español
Select the language for Setup display.