31EN
Disc
Management
Recording PlaybackIntroduction Connections
Basic Setup
Editing Function Setup VCR Function Others
Note for auto clock setting
• The unit receives the clock data at 12:00 a.m/p.m
when the power is off.
• The clock may set itself automatically after this unit
receive the antenna/cable signal and plug in the
power cord.
• If the clock is not set correctly, timer recording does
not work properly.
• When analog broadcast ends, analog auto clock
setting will no longer be available. Try digital auto
clock setting in that case.
• For digital auto clock setting, incorrect time may be
obtained depending on the broadcast information.
If this occurs, set the “Auto Clock Setting“ to “OFF” at
step 4 and try “Manual Clock Setting“ on page 32.
DIGITAL AUTO CLOCK SETTING
1
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[ENTER].
2
Use [K / L] to select “Clock”, then
press [ENTER].
“Clock” menu will appear.
3
Use [K / L] to select “Auto Clock
Setting”, then press [ENTER].
4
Use [K / L] to select “Manual”, then
press [ENTER].
Auto Clock Setting
OFF
Auto
Manual
5
Press [{ ] to highlight “CH”. Press
[K / L] to select “DTV”, then press
[ B] .
Set Channel No.
DTV 1
6
Use [the Number buttons] or [K / L]
to enter the desired major channel
number to refer, then press [ENTER].
7
Use [K / L] to select the desired time
zone, then press [ENTER].
Time Zone
Atlantic
Eastern
Central
Mountain
Pacific
Alaska
Hawaii
8
Press [SETUP] to exit and turn off the
unit.
This unit will search for the time only when the
power is off. Leave it off for at least 15 minutes
to give this unit time to set the clock.
Auto Clock Setting (cont’d)
SETTING THE CLOCK
Time adjustment for each time zone
Atlantic GMT (Greenwich Mean Time ) - 4 hours
Eastern GMT (Greenwich Mean Time ) - 5 hours
Central GMT (Greenwich Mean Time ) - 6 hours
Mountain GMT (Greenwich Mean Time ) - 7 hours
Pacific GMT (Greenwich Mean Time ) - 8 hours
Alaska GMT (Greenwich Mean Time ) - 9 hours
Hawaii GMT (Greenwich Mean Time ) - 10 hours