Filter
Top Products
30 EN
SETTING THE CLOCK
Auto Clock Setting
This unit can set the time and date automatically by
referring to a channel that carries a clock information. If a
PBS (public broadcasting station) is available in your area,
follow “Auto Clock Setting” below. If not, follow “Manual
Clock Setting” on page 32.
Make sure
• The antenna/cable TV connections are correct.
• Channels are set. (Refer to pages27-29.)
SE-R0294
OPEN/
CLOSE
INPUT
SELECT
HDMI
.@/: ABC
GHI
PQRS TUV
SPACE
SETUP DISPLAY AUDIO
TIMER
PROG.
DISC MENU
CLEAR RETURN
TOP MENU
WXYZ
JKL MNO
DEF
ENTER
INSTANT
SKIP
PLAY
DVDVCR
PAUSE
REV
SKIP
STOP
SKIP
FWD
1.3x/0.8x
PLAY
TIME SLIP
TIMER SET ZOOMSEARCHREPEAT
RECREC MODEDUBBING
DTV/TV
CH
ENTER
GHI
PQRS TUV
SPACE
WXYZ
JKL MNO
.@/: ABC DEF
SETUP
ANALOG AUTO CLOCK SETTING
1
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[ENTER].
2
Use [K / L] to select “Clock”, then
press [ENTER].
“Clock” menu will appear.
3
Use [K / L] to select “Auto Clock
Setting”, then press [ENTER].
4
Use [K / L] to select “Auto”, then
press [ENTER].
Auto Clock Setting
OFF
Auto
Manual
5
Press [SETUP] to exit.
6
Press [I/
y
y ON/STANDBY] to turn off
the unit.
This unit will search for the time only when the
power is off. Leave it off for at least 15 minutes
to give this unit time to set the clock.
1
Select “Manual” at step 4, then press
[ENTER].
2
Use [the Number buttons] or [K / L]
to enter your PBS channel number,
then press [ENTER].
Set Channel No.
CH 1
3
Press [SETUP] to exit and turn off the
unit.
Manual Auto Clock Setting
If the unit chooses an incorrect PBS channel, set the PBS
channel manually by following the steps below.