Filter
Top Products
English
- 17
Settings
3
Press the … or † button to select Auto Setup,
then press the OK or √ button.
The Country Selection menu is displayed.
Press the œ/√, …/† buttons to select your
country.
•Refer to following abbreviation table when
selecting “Country”.
A(Austria)
NL(Netherlands)
S(Sweden) PL(Poland)
B(Belgium) I(Italy) CH(Swiss) CZ(Czech)
DK(Denmark)
N(Norway) TR(Turkey) Others
FIN(Finland) P(Portugal) GR(Greece)
D(Deutschland)
E(Spain) HU(Hungary)
4
Press the OK button.
A message is displayed, indicating that any
channels already preset on your DVD-VCR will
be deleted.
5
Press the OK button to start the auto scanning.
The message Please Wait is displayed.
•The first frequency band is scanned and the
first station found is displayed and stored.
Then the DVD-VCR searches for the second
station and so on.
When the automatic scanning procedure has
finished, the DVD-VCR switches automatically
to programme 1.
•If you wish to cancel the auto scanning before
the end, press the MENU button.
Auto Setup
Your data will be lost
Press OK to continue
MENU to exit
OK
RETURN MENU
Auto Setup
RETURN
MENU
Please Wait
10%
√√
The number of stations automatically stored
by the DVD-VCR depends on the number
of stations that it has found.
The time and date are set automatically
from the broadcast signal. If the signal is
weak or ghosting occurs, the time and date
may not be set automatically. In this case,
they should be set manually (refer to page
16).
Once the auto scanning procedure has
finished, some stations may have been
stored more than once; select the stations
with the best reception and delete the ones
no longer required (refer to page 18).
Note
Country Selection
ANLSPL
BI CHCZ
DK N TR Others
FIN P GR
DE HU
OK
RETURN
MENU