Filter
Top Products
English
- 19
Settings
Clearing a Preset
Station
If you have stored a TV station:
• That you do not require
• At the wrong programme position, you can cancel it.
1
Press the MENU button, then press the OK or
√ button.
2
Press the … or † button to select Install, then
press the OK or √ button.
The Install menu is displayed.
3
Press the … or † button to Select Manual
Setup, then press the OK or √ button.
The TV STATION TABLE menu is displayed.
4
Press the … or † button to select required
preset TV station.
Press the CLEAR button to delete.
5
Repeat the same procedure from step 4
onwards until all the required stations have
been cleared.
SETUP
DVD
VCR
PROG
FUNC
Install
Auto Setup
√√
Manual Setup
√√
TV System :G
√√
VCR Output CH :CH36
√√
OK RETURN MENU
❉ ❉ TV STATION TABLE ❉ ❉
PR CH NAME DEC
1 021 - - - - OFF
2
3
4
5
……†† √√
SWAPPING : OK
DELETE : CLEAR RETURN
8
Press the … or † button to select NAME.
The station name is set automatically from the
broadcast signal.
•To change the programme’s name, press the
√ button. The first letter of the name flashes.
9
10
Repeat this procedure from step 4 onwards,
until all the required stations have been stored.
11
Press the MENU button to exit the menu.
❉ ❉ MANUAL TUNING ❉ ❉
PR : 1
CH : 021
MFT : -
DECODER : OFF
NAME : - - - -
……†† œœ √√
MEMORY: OK
RETURN
Select a character
in the name
Move to the next
previous or
character
Press the …, †button until the
required character is displayed
(letters, numbers or “-” character).
Press the œ or √ button
respectively.
To... Then...
If you... Then...
Wish to store the
station displayed
Do not wish to
store the station
displayed
•
Press OK to store the station.
•
Press the … or † button until the
CH is selected.
•
Press the œ or √ button to go on
scanning the frequency band and
display the next station.