Filter
Top Products
41
DVD Playback
Using the
TV/DVD’s Features
Setting up
your TV/DVD
Connecting
your TV/DVD
Introduction
Appendix
Using the StableSound
®
feature
The StableSound
feature limits the highest volume level to prevent
extreme changes in volume when the signal source is changed.
To turn on the StableSound
®
feature:
1. Press MENU, then press
or to display the AUDIO menu.
2. Press ▲ or ▼ to highlight STABLE SOUND.
3. Press or to highlight ON.
To turn off the StableSound
®
feature:
Highlight OFF in step 3 above.
Resetting your audio adjustments
The RESET function returns the audio adjustments to the following
factory settings:
Bass ................. center (25)
Treble ............... center (25)
Balance ............ center (0)
To reset your audio adjustments:
1. Press MENU, then press
or to display the AUDIO menu.
2. Press ▲ or ▼ to highlight RESET, and then press
or .
MENU
Using the surround sound feature
The surround sound feature expands the audio listening field wider and
deeper to create exceptional sound quality from the TV’s speakers.
The feature uses stereo signals from a TV broadcast or video input.
To turn on the surround sound feature:
1. Select the STEREO mode, if available (see “Selecting stereo/SAP
broadcasts” on page 40.)
2. Press MENU, then press
or to display the AUDIO menu.
3. Press ▲ or ▼ to highlight SURROUND.
4. Press or to highlight ON.
To turn off the surround sound feature:
Highlight OFF in step 4 above.
In general, you can leave your TV in surround mode because it will
automatically output the type of sound being broadcast (surround
stereo or monaural).
5X20301A(E)P41-43 13/3/06, 5:22 PM41