Filter
Top Products
42
Using the
TV/DVD’s Features
Auto power off
The TV/DVD will automatically turn off after approximately 15 minutes if it is tuned to a vacant channel or a station that completes
its broadcast for the day and stops broadcasting on that channel. This feature does not work in Video input/PC/DVD mode.
Understanding the Power Return feature
If the power is cut off while you are viewing the TV/DVD and the power is resupplied, the Power Return feature will turn the TV/
DVD on automatically.
If the power is going to be off for a long time or you are going to be away from home for a long time, unplug the power cord from
the wall outlet to prevent the TV/DVD from turning on in your absence.
Adjusting the back lighting feature
If your TV/DVD is in a bright room, the screen image may be difficult to
see. You can use the BACK LIGHTING feature to adjust the screen
brightness for improved picture clarity.
To adjust the back lighting:
1
.
Press MENU, then press or until the SETUP menu appears.
2. Press
or to highlight BACK LIGHTING.
3. Press
or
to adjust the screen brightness.
Displaying on-screen information
Press DISPLAY to display the following on-screen information:
• Clock
• Channel number or Video input mode selected
• Channel label (if preset)
• Stereo or SAP (second audio program) audio status
• Content rating
• On timer, Sleep timer (if preset)
• Picture size
STEREO
SAP
TV-PG L V
ON TIMER 12:00AM
SLEEP TIMER 2h00m
ANT
FULL ABCD
CLOCK 12:00AM CABLE
002
OFF
FILM
ON
16
SETUP
CLOSED CAPTION
PICTURE SIZE
PICTURE SCROLL
CINEMA MODE
ASPECT
BACK LIGHTING
:SELECT :ADJUST
Note:
The cold cathode fluorescent lamp used for
the back light on this TV/DVD has a limited
life. When areas on the screen darken, flicker,
or no longer light up, the lamp may be at the
end of its life. Contact your nearest Toshiba
Authorized Service Station.
DISPLAY
MENU
Selecting the HDMI audio input source
See “Connecting an HDMI
TM
or a DVI device” on page 17 for connection
information.
If you connect a DVI device, you must also connect the analog audio
cables to the HDMI audio IN jacks (see page 17) to hear audio. Set the
HDMI audio input setting to “DVI” with this connection.
If you connect an HDMI device and play media with digital audio output,
set the HDMI audio input setting to “HDMI” with this connection to hear
digital audio .
If you connect an HDMI device but play media with analog audio output
(for example, certain CDVs do not output digital audio), you must also
connect the analog audio cables to the HDMI audio IN jacks
(see page 17)
to hear audio
. Set the HDMI audio input setting to “DVI” with this connection.
To select the HDMI audio input source:
1. Press MENU, then press or to display the AUDIO menu.
2. Press
or to highlight HDMI.
3. Press
or to select HDMI or DVI.
MENU
5X20301A(E)P41-43 13/3/06, 5:22 PM42