Filter
Top Products
47
DVD Playback
Using the
TV/DVD’s Features
Setting up
your TV/DVD
Connecting
your TV/DVD
Introduction
Appendix
Zooming
DVD VCD CD
This unit will allow you to zoom in on the frame image. You can then
make selections by switching the position of the frame.
1. Press ZOOM during playback.
The center part of the image will be zoomed in.
Each press of ZOOM will change the ZOOM
1 (x 1.3), 2 (x 1.5) and
3 (x 2.0).
2. Press
/ / / to view a different part of the
frame.
You may move the frame from the center position to UP, DOWN,
LEFT or RIGHT direction.
3. In the zoom mode, press ZOOM repeatedly to return to a 1:1 view
(
Off).
Locating desired scene
DVD VCD CD
Use the title, chapter and time recorded on the DVD disc to locate the
desired point to playback. In the case of VCD/CD discs, track and time
are used to locate the desired point to playback.
To check the title, chapter/track and time, press DISPLAY.
1. Press JUMP during playback or resume
stop mode.
2. Press
or to select the “Time”,
“Title/Track” or “Chapter”.
3. Press Number buttons (0–9) to input
the number.
• If you input a wrong number, press
CANCEL.
• Refer to the package supplied with
the disc to check the numbers.
4. Press ENTER. Playback starts.
• When you change the title, playback starts from Chapter 1
of the selected title.
• Some discs may not work in the above operation.
Notes:
•You can select the Pause, Slow or Search
playback in the zoom mode.
• Some discs may not respond to zoom
feature.
JUMP
Note:
In case of the Video-CD playback with PBC,
the JUMP does not work. To turn off PBC, see
page 53.
ZOOM
DISPLAY
CANCEL
ENTER
Number
buttons
1
Time
Title
Chapter
Jump
Time
Title
Chapter
Jump
Time
Title
Chapter 12
Jump
5X20301A(E)P44-55 13/3/06, 7:17 PM47