Filter
Top Products
66
62HM15
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
To select the video input source to view:
1. Press INPUT on the remote control or TV/VIDEO on the
TV front panel.
2. Press 0–7 to select the input source you want to view, which
will depend on the input terminals you used to connecting
your devices (see Chapter 2).
The current signal source displays in the top right corner of
the INPUT SELECTION screen.
Note:
•When the Input Selection screen is open, you also can use the yz
buttons on the remote control (or the Channel yz buttons on the
front panel) to change the input.
•When the Input Selection screen is not open, you can repeatedly
press the INPUT button on the remote control or the TV/VIDEO
button on the TV front panel to change the input.
•To select an IEEE1394 input source, press the TheaterNet DEVICE
button on the remote control (see page 26 and 44).
• If an IEEE1394 device is the current input, it will appear at the
bottom of the Input Selection list; however, it will not display in the
list if you change the input source.
•You can label the video input sources according to the specific
devices you have connected to the TV (see “Labeling the video
input sources” on the next page).
•The source can be “hidden.” See page 67 for details.
• If you use the TV’s remote control to start recording, you will not
be able to change inputs during recording.
If you use a device other than the TV’s remote control to start
recording and then change inputs, the recorded audio and video
may be affected.
CT-90216
ACTION
ENTER
MENU
–
100
+10
TV/VIDEO
* The MENU
button
functions as
the ENTER
button when
a menu is
on-screen.
Using the TV’s features
8
INPUT
y
z
CHANNEL
zy
Selecting the video input source to view
Numbers
MENUVOLUMECHANNELEXITTV/VIDEO POWER
{
Remote control
TV front touchpad
(ENTER)*
#01E066-075_62HM15 5/24/05, 6:20 PM66
Black