Filter
Top Products
Computer System HyperTools Tevion TSD-DR40HD User Guide
F:\Our Files\Our Computers\User Guides\Tevion (Wintal)\Tevion TSD-DR40HD DVR Performance Log.doc 18/5/08 at 10:57 Page 24
5.3.6 Changing the Index Picture of a TV Program Recorded on HDD
In addition to entering a new name for a recorded program you may be able to recognise it just
by means of its so-called “Index Picture”. The default Index Picture is the very first frame of the
recording, but it can be replaced by any other frame found within the recording.
So, you may want to change the Index Picture of the recording to make it easier to find it.
1. On TRC press Power button to turn on the TV (if not already on).
2. On TRC pressed button until
2
is shown.
3. On DRC press STANDBY/ON button to turn on the DVR and wait until “Hello” display
on front panel has been replaced by “No disc” message shown on screen.
4. On DRC press HDD button to show TV programs recorded on the Hard Disk.
5. On DRC use the Down Arrow or Up Arrow button to highlight the data about the
program you wish to delete:
6. On DRC press the Right Arrow button to display the HDD submenu:
.
7. On DRC use the Down Arrow to select the “Change Index Picture” option and press the
SELECT button:
8. The program starts playing straight away and when you see a new picture on screen that
you think is a good one for the program in question, press SELECT button to change the
Index picture.
9. To exit, press the HDD button one or more times.