Filter
Top Products
SEARCHING FOR YOUR CODE
If your TV, VCR, Cable Converter or Audio
Component does not respond to the Millennium
4 after trying all of the codes listed for your brand,
or if your brand is not listed at all, try searching for
your code.
For example, to search for a code for your TV:
1. Turn on your TV.
2.
On the Millennium 4, press and hold
SETUP until the LED blinks twice, then
release SETUP.
3. Enter 9 - 9 - 1. The LED will blink twice.
4.
Aim the remote control at the the TV and
press POWER once.
5. Press and release the CH+ key continu-
ously, then stop when the TV turns off.
NOTE: In the search mode, the Millennium 4
will send IR codes from its library to the select-
ed component, starting with the most popular
code first.
6.
Press PWR. The TV should turn on, then
press SETUP to lock in the code.
NOTE: If the TV does not turn on during
step 6, then slowly press and release CH- to go
backthrough the codes, then press SETUP when
theTV turns on.
7. To search for the codes of your other
components, repeat steps 1 through 6,
but substitute the appropriate key (i.e.,
VCR, CBL, or AUDIO) for the (VCR,
Cable, or Audio) component you are
searching for.
38