Filter
Top Products
42
3. Now, whenever you press Volume +,
Volume –, or MUTE on the Millennium 4,
volume will be controlled by your VCR.
CHANGING VOLUME LOCK CONTINUED
To change Volume Lock to the AUDIO mode:
NOTE: Performing these steps will allow you to access the
volume control of your audio component in all modes.
1.
On the Millennium 4, press and hold
SETUP until the LED blinks twice, then
release SETUP.
2.
Enter 9 - 9 - 3 and then press AUDIO
once. The
LED will blink twice.
3. Now, whenever you press Volume +,
Volume –, or MUTE on the Millennium 4,
volume will be controlled by your audio
component.