Filter
Top Products
41
CHANGING VOLUME LOCK
The Millennium-4 is set to control volume of a
component through your TV while in the TV,
VCR, or Cable mode. However, in the Audio mode,
you have separate control of of your audio compo-
nent’s volume.
If your TV is not remote controllable, or if you
would like the volume to be controlled by a dif-
ferent component, you can change the Volume
Lock setting to control a volume through a non-
associated mode (e.g., through the cable in the TV
mode).
To change Volume Lock to the CABLE mode:
1.
On the Millennium 4, press and hold
SETUP until the LED blinks twice, then
release SETUP.
2.
Enter 9 - 9 - 3 and then press CBL once.
TheLED will blink twice.
3. Now, whenever you press Volume +,
Volume –, or MUTE on the Millennium 4,
volume will be controlled by your Cable
Converter.
To change Volume Lock to the TV mode:
1.
On the Millennium 4, press and hold
SETUP until the LED blinks twice, then
release SETUP.
2.
Enter 9 - 9 - 3 and then press TV once.
The LED will blink twice.
3.
Now, whenever you press Volume +,
Volume –, or MUTE on the Millennium 4,
volume will be controlled by your TV.
To change Volume Lock to the VCR mode:
1.
On the Millennium 4, press and hold
SETUP until the LED blinks twice, then
release SETUP.
2.
Enter 9 - 9 - 3 and then press VCR once.
The LED will blink twice.