Filter
Top Products
ViewSonic N1700w 29
Troubleshooting
No power
Make sure power button (or switch) is ON.
Make sure A/C power cord is securely connected to the DC power supply
and the power supply is firmly connected to the Display.
Plug another electrical device (like a radio) into the power outlet to verify
that the outlet is supplying proper voltage.
Power is ON but no screen image
Make sure the video cable supplied with the Display is tightly secured to
the video output port on the back of the computer. If the other end of the
video cable is not attached permanently to the Display, tightly secure it to
the NexTVision display.
Adjust brightness and contrast.
If you are using an Macintosh older than G3, you need a Macintosh
adapter.
Wrong or abnormal colors
If any colors (red, green, or blue) are missing, check the video cable to
make sure it is securely connected. Loose or broken pins in the cable
connector could cause an improper connection.
Connect the Display to another computer.
Control buttons do not work
Press only one button at a time.
VXP problems
The VXP adapter must be plugged in when the display is turned on. It is
not “hot-pluggable”.