Filter
Top Products
ViewSonic N1700w 6
Using the Display (PC)
Setting the Timing Mode (PC RGB Input)
Setting the timing mode is important for maximizing the quality of the screen
image and minimizing eye strain. The timing mode consists of the
resolution (example 1280 x 768) and refresh rate (or vertical frequency;
example 60 Hz). After setting the timing mode, use the OSD controls to
adjust the screen image.
NOTE: For the best picture quality set your NexTVision
®
display timing mode
to: 1280 x 768 @ 60Hz.
To set the Timing Mode:
1. Set the resolution: Right-click on the Windows desktop > Properties
>Settings > set the resolution.
2. Set the refresh rate: See your graphic card's user guide for instructions.
WARNING
: Do not set the graphics card in your computer to exceed the
maximum refresh rate of 75Hz; doing so may result in permanent damage to
your Display.