Filter
Top Products
Connecting your DVD Player
Using S-Video or Composite video
1. Turn off the power of the RPTV and DVD player.
2. Connect the S-Video or video (yellow color) terminal from the rear of your DVD player to the S-Video or video
(yellow color) terminal in the AV IN on the rear of your RPTV.
3. Connect the R (red color) and L (white color) audio connectors from the rear of your DVD player to the R (red
color) and L (white color) audio input connectors in the AV IN 2 on the rear of your RPTV.
4. Turn on the power of the RPTV and DVD player.
5. Select AV 2 using the INPUT button on the right side of the RPTV or on the remote control.
Note:
a). If you are already using the AV IN 2input for another component, or you do not want to use the AV IN 2 input for
the DVD player, you can connect the DVD player to the AV IN 1 group of connections.
b). Refer to your DVD player User Manual for more information about the video output requirements of the product.
VIDEO Equipment
AUDIO Cable (Not supplied)
Back of Rear Projection TV
S-Video Cable (Not supplied)
or
Video Cable (Not supplied)
10
FORSERVICEONLY
(RS-232C)
EntertheS-VIDEOortheVIDEOterminal
canbeused,buttheS-VIDEOoverrides
theVIDEOterminal.
MakesureANALOG/DIGITALRF
DIGITAL
ANALOG
Inputsareconnectedcorrectly.
AUDIO(L/R)
RGB
L
L
L
R
R
R
AUDIO
S-VIDEO
VIDEO
AUDIO
AUDIO
AUDIO
AUDIO
(ATSConly)
(ATSConly)
OUTPUT
DIGITAL
COAXIAL
OPTICAL
Y
Y
P
B
PB
PR
PR
L
L
R
R
AV IN1AV IN1
AV IN2AV IN2
COMPONENTIN1
COMPONENTIN2
ANTENNAIN
PCINPUTPCINPUT
HDMI
CENTERCHANNELCENTERCHANNEL
INPUT