Filter
Top Products
24
Menu Functions
PICTURE ADJUST
You can adjust the settings of the PICTURE( CONTRAST, BRIGHTNESS, COLOR, TINT, SHARPNESS, COLOR
TEMP, NOISE REDUCTION, VIEW FORMAT.)
AUDIO ADJUST
You can adjust the AUDIO settings (TREBLE, BASS, BALANCE, EFFECT) for the internal SPEAKERS.
PIP SETUP
You can adjust the PICTURE IN PICTURE function.
SETUP
You can set LANGUAGE, SPEAKERS, CAPTION STYLE , DTV SETUP, HDMI and input source settings.
PARENTAL CONTROLS
PARENT CONTROL
ACCESS CODE : You must set the password (ACCESS CODE) when using parental control functions.
Note : This function allows you to restrict viewing of TV programs, to control TV usage based on FCC data
and to prevent your children from watching content that may be deemed harmful.
SPECIAL FEATURE
SYSTEM INFO.
You can adjust the OSD position of horizontal and vertical and setup Sleep timer.
Displays current system information.
MODEL NUMBER, MAIN INPUT, WIDE FORMAT, PIP INPUT, LAMP TIME and SOFTWARE VERSION.
Getting Started
Turning your RPTV "on"
1. Plug the power cord into an AC wall socket. The POWER LED on the front
panel will light red.
2. Press the POWER button on the side panel "on" the RPTV or the POWER
button on the Remote Control to power.
The READY LED will start flashing while the lamp turned on. Once the
lamp is warm enough the indicator will stay lit green and the picture will
begin to display on the Screen.
3. When the RPTV is "on", press the POWER button on the side panel or the
POWER button on the Remote Control. A message will display on the
screen warning you that you will power "off" the RPTV. Once the RPTV has
been turned "off" you cannot turn it "on" again until at least 30 seconds
later as a protection feature for the lamp. The lamp could be damaged if it
is turned "on" too soon after being "off", The READY LED will start flashing
turn off and the will be in the standby mode.
MAIN MENU
AUDIOADJUST
PIPSETUP
SETUP
PARENTALCONTROLS
SPECIALFEATURES
SYSTEMINFO.
AUDIOADJUST
PIPSETUP
SETUP
PARENTALCONTROLS
SPECIALFEATURES
SYSTEM
INFO.
SELECT ENTER OK BACK EXIT
PICTUREADJUST
until the protection time has passed and then the READY LED will