Filter
Top Products
Mount Installation 9
MAN0063 (12/15/00)
LOADER MOUNT INSTALLATION Cont’d
Install Grill Guard (Optional)
1. Attach grill guard to front support, using four 3/4
NC x 2 hex head cap screws (15), flat washers (13),
lock washers (23), and nuts (22).
NOTE: Install cap screws from inside front support
as shown in Figure 3.
13. 57798 3/4 Flat washer
15. 735 3/4 x 2 Cap screw
22. 1450 3/4 Nut
23. 2522 3/4 Lock washer
Figure 3 #57864 Grill Guard Kit Installed
23
22
15
13
Install Right & Left Mounts to
Clutch Housing
1. Attach right and left mounts to tractor clutch
housing, using cap screws (11, 15) and flat washers
(13) as shown in Figure 4.
11. 300517 3/4 x 1-3/4 Cap screw
13. 57798 3/4 Flat washer
15. 735 3/4 x 2 Cap screw
Figure 4 Right Mount Installed at Clutch Housing
11
13
15
13