Filter
Top Products
Hydraulic Installation 13
MAN0063 (12/15/00)
#57923 Hose Kit Cont’d
Route Hydraulic Hoses
1. Route hoses along loader mount, under the
right side of the operator’s platform, and over the
rear axle.
Be sure to avoid contact with 3-point linkage, brake
pedals, and other moveable tractor components.
Hoses must be routed so they are not pinched, bent
sharply, or chafed during operation. Hoses must not
interfere with any tractor control operation or con-
tact any moving parts.
2. Connect hydraulic hoses to tractor hydraulic
couplers as shown in Figure 7.
Figure 7 Hose Connections to Tractor
Hydraulic Couplers
1
/()7 6,'(
+<'5$8/,&
&21752/
&
'
%
$
5,*+7 6,'(
+<'5$8/,&
&21752/
Install #58033 Hose Hanger
1. Install hose hanger bracket beneath right side
of the operator’s platform as shown in Figure 8. Use
cap screw, flat washers, and lock nut as shown in
Figure 9.
2. Route hoses through support and secure with
lock pin (15).
11. 58033 Hose hanger bracket
12. 6778 5/16 NC Lock nut
13. 4378 5/16 Flat washer
14. 6250 5/16 NC x 1-1/4 Cap screw
15. 58047 1/4 x 2-1/2 Lock pin
Figure 8 #58033 Hose Hanger Installed
Figure 9 Hose Hanger Assembly
+26(
+$1*(5