Filter
Top Products
Hydraulic Installation 19
MAN0063 (12/15/00)
#46675 Control Valve & #1001420 Hose Kit Cont’d
2
Install #58033 Hose Hanger Bracket
1. Install hose hanger bracket (8) under platform
between brake pedals and chassis as shown in Fig-
ure 16.
2. Secure with hex head cap screw (10), flat
washers (11), and lock nut (12).
3. Route hoses through hose hanger bracket and
up behind right platform as shown in Figure 17.
4. Route PBY and IN hoses to PBY adapter plate.
Route OUT hose to top of rear axle.
5. Secure hoses in hose hanger with lock pin (9).
6. Secure hoses every 20 inches with plastic ties.
8. 58033 Hose hanger bracket
9. 58047 1/4 x 2-1/2 Lock pin
10. 6250 5/16 x 1-1/4 Cap screw
11. 4378 5/16 Standard flat washer
12. 6778 5/16 Lock nut
Figure 15 Hose Hanger Installed
Figure 16 Hose Routing
8
9
10
11
11
12
Hose Hanger
OUT Hose