Filter
Top Products
Mount Installation 7
MAN0063 (12/15/00)
LOADER MOUNT INSTALLATION
■ Only use #111876 Loader Mounting Kit for
mounting Woods 1020/1027 loaders on Ford
New Holland 2810, 2910, 3910 FWA & 3230,
3430, 3930, 4610, 4630 2WD & FWA, and 4000,
4100, 4110, 4600, 4610 all-purpose 2WD trac-
tors. Any other use or modification of this
mounting kit may result in serious injury or
death.
■ Safety instructions are important! Read all
attachment and power unit manuals; follow all
safety rules and safety decal information.
(Replacement manuals are available from
dealer or, in the United States and Canada, call
1-800-319-6637.) Failure to follow instructions
or safety rules can result in serious injury or
death.
■ If you do not understand any part of this
manual and need assistance, see your dealer.
■ Always wear relatively tight and belted
clothing to avoid entanglement in moving
parts. Wear sturdy, rough-soled work shoes
and protective equipment for eyes, hair,
hands, hearing, and head.
IMPORTANT
■ This equipment must be assembled and
installed on the customer’s tractor by the
Woods dealer. Dealer must thoroughly inspect
equipment and complete each item on the
PRE-DELIVERY CHECK LIST, DELIVERY
CHECK LIST, and WARRANTY REGISTRA-
TION before equipment is released to the cus-
tomer.
CAUTION
TRACTOR PREPARATION
For installing this mounting kit, references to right,
left, forward, and rearward directions are deter-
mined from the operator’s position in the tractor
seat.
1. Shut off engine and set parking brake during
installation.
2. Remove the tractor front weights and weight
bracket if equipped.
3. Set tractor front wheel width to 61-1/2” (center
line of thread) as instructed in tractor operator man-
ual.
4. Remove cowl-mounted headlights if equipped.