3. Diagnostics Applications
15
4. To select the correct option step by step, do
the following:
Select the vehicle manufacturer. This displays
the options for you to choose from.
Figure3.14: Selecting Vehicle Information Screens
On each screen that appears, select the correct
option. Do this until the complete vehicle
information is entered, as shown in Step 6.
5. To acquire the vehicle VIN manually or
automatically, do the following:
Select VIN acquisition. This displays the VIN
acquisition screen, which may contain two
options for you to choose: automatic
acquisition or manual acquisition.
Select either automatic acquisition or manual
acquisition to acquire the VIN.
Figure 3.15: Manual VIN Acquisition Screen
6. After you have entered the vehicle
information, the diagnostic testing selection
screen will display as below:
Figure 3.16: Diagnostic Testing Selection Screen
NOTE: The Auto Scan function will carry out
an overall scan to check the status of all the
systems on board the vehicle being tested.
Clicking on Auto Scan will lead to retrieving
the trouble codes in each system of the
vehicle one by one. Auto Scan will take a few
minutes.
NOTE: The Control Unit option will list
down all the systems that might be available
on the vehicle for you to select to test.
Do one of the following:
To select Auto Scan, go to step 7 and then
step 9.
To select Control Unit, go to step 8 and then
step 9.
