4. Data Manager & Printing
32
To view a previously taken picture, please
follow these steps:
1. Follow the instructions in the General
Procedures on page 29 to display the Data
Manager screen, and click on the Screen
Capture icon to access the Screen Capture
program. Or,
Click on the camera icon in the upper right
corner of the screen to access the Screen
Capture Program.
2. Click on the Recent Images function bar for
the screen to show as below.
Figure 4.7: Screen Capture – Recent Images
3. Click on the screen to zoom in the picture to
full screen and click again to zoom out.
4. Use the Prev. or Next buttons to view the
previous or next pictures.
5. Use the Delete button to delete the picture
being displayed, or use the Delete All button
to delete all pictures stored.
6. Click on Esc to return to the Data Manager
menu.
To print the picture, please refer to the
Section 4.5 Printing on page 32.
4.5. Printing
The printing function allows you to print data and
pictures.
1. Ensure that the print service software has
been properly installed to your PC. Please
refer to Section 2.3 Install the PC Software on
page 9.
2. Ensure that the scan tool has been connected
to the Internet. Please refer to Section 5.2
Wi-Fi on page 33 or Section 5.3 Network on
page 34.
3. Run the print service software on you
computer.
4. Click on the Print function key on the screen
of the scan tool.
NOTE: A Print function key appears in the
right column of the screen if the data is
printable.
5. Select a computer on the scan tool if two or
more computers are running the print service
software within the network.
6. Click on the Print Server tab on the top of
print service software on the computer and
wait for the printing file to load.
Figure 4.8: Print Service Software Window
7. Click on the Print button in the Print Service
Software window to print.
