4. Data Manager & Printing
31
To delete a data logging file, please follow these
steps:
1. Follow the instructions in the General
procedures on page 29 to display the Data
Manager screen.
2. Click on the Data Logging icon to enter the
Data Logging screen.
3. To delete all data logging files:
Click on “Delete All Vehicles”.
An information screen of “Are you sure to
delete all vehicles?” displays.
Click on Yes to delete all data logging files
reserved, or click on No to exit.
4. To delete one or some of the data logging
files:
Click on “Delete Logging File”.
Select a test.
Select the file(s) you want to delete and click
on OK.
An information screen of “Are you sure to
delete?” displays. Click on Yes to confirm.
4.4. Screen Capture
The Screen Capture function allows you to take a
picture of the test screen to record visible items
displayed on the monitor, and to print the pictures
taken.
To take a picture, please follow these steps:
1. Click on the camera icon in the upper right
corner of the screen if you want to take a
picture of the displaying screen.
Figure 4.6: Screen Capture Screen
2. Click on the File Name space and wait for the
soft keyboard to pop up; use the soft
keyboard to modify the file name, if
necessary.
NOTE: The “Adding Detail” area can be left
blank.
3. Click on the Adding Detail space and wait for
the soft keyboard to pop up; use the soft
keyboard to put in explanations to the picture.
4. Click on Save to save the picture.
Detailed description of the last picture saved
will be shown in the Old Details space. Please
click on “Save with Old Detail” to save the
picture with the same descriptions as the last
picture.
5. The scan tool displays an information screen
indicating the file name and storage location.
6. Click on Esc to return to the Data Manager
screen.
NOTE: To print the picture, please refer to
Section 4.5 Printing on page 32.
