3. Diagnostics Applications
16
7. Select Auto Scan, and the following screen
will display:
Figure 3.17: Auto Scan System Menu Screen
NOTE: Users are allowed to check the
details of each system, quickly erase DTC,
and display DTC from the Auto Scan system
menu screen. To select the functions on the
right column of the screen, you need to
Clicking once on a system for selection and
Clicking once on the function key. To check
the details of each system, you need to click
twice on the system to enter. Clicking once on
a system will not lead to any option.
NOTE: When exiting viewing a system, the
scan tool will once again read the data and
check the latest status of the system (i.e. a
trouble code has been erased in the system).
Wait for the reading process to complete
before you make any selection, or the cursor
will return to the system being read.
Figure 3.18: Reading Status Screen
NOTE: You can save the Auto Scan
information as “Vehicle Record” so that you
will not need to follow the vehicle selection
process again on the same vehicle in later
tests. For detailed instructions, please refer
to the steps on page 17.
8. Select Control Unit, and the following screen
will display:
Figure 3.19: Control Unit System Menu Screen
9. Select a system to display the function menu
and start testing.
Figure 3.20: Function Menu Screen
