5. System Setup
33
5. System Setup
The System Setup functions allow you to adjust
default setting and view information about
MaxiDAS
®
DS708.
5.1. General Procedures
To access the System Setup functions, please
carefully follow the steps below:
1. Ensure that the scan tool is connected to a
power source and the power LED light is
illuminated.
2. Press the ON/OFF button to turn on the scan
tool and wait for the home screen to appear.
3. Click on Setup/Help. This displays the
Setup/Help screen.
Figure 5.1: Setup/Help Screen
4. Select the item to adjust.
5. Refer to the following sections:
Wi-Fi
Network
Unit
Date/Time
Language
Backlight
Beep
Touch
Remote Desk
About
Printing
5.2. Wi-Fi
The Wi-Fi function allows you to use wireless
network connection on the scan tool.
1. Follow the instructions in the General
Procedures on page 33 to display the
Setup/Help screen.
2. Click on the Wi-Fi icon and wait for the
WLAN Settings window to pop up.
Figure 5.2: WLAN Settings Window
3. Select the network you want to connect in the
Active Networks column, and click on the
Connect button.
4. Wait for an IP address to be assigned.
5. Click on OK to save your configuration and
exit.
NOTE: If no network is listed in Preferred
Networks column or Active Networks column,
click on the button to refresh the screen.
If refreshing does not help, you will have to
add a hidden wireless network manually.
