24 Chapter 1
Before Printing
Loading the Print Media in the Auto Sheet Feeder
z Loading Paper
1 Flatten the four corners of the paper before loading it.
2 Prepare to load paper.
(1) Open the Paper Support, then pull out the Paper Support Extension to support the paper.
(2) Press the Open Button to open the Paper Output Tray.
(3) Pull out the Paper Output Tray Extension completely.
(4) Press [Feed Switch] so that the Auto Sheet Feeder Lamp (A) lights.
Note
For detailed information on the specialty media Canon provides for use
with its various printers, see “Recommended Paper and Requirements”
on page 19.
Note
z Align the edges of paper neatly before loading. Loading paper without
aligning the edges may cause paper jams.
z When paper is curled, hold the opposing curled corners and gently
bend them in the opposite direction until the paper becomes
completely flat. See “Paper is curled.” on page 125.
Note
After printing, to put back the Paper Output Tray Extension, push it back
while raising it a little.
Note
You can also select the paper source with the printer driver. For details,
refer to the Printer Driver Guide.
(2)
(1)
(3)
(4)
(A)
