Chapter 6 79
Printing Photographs from a Wireless Communication Device
Setting Items
(1) Select the page size for the wireless print.
(2) Select the media type for the wireless print.
(3) Correct the contours and smoothes out the jaggedness.
Image optimizer ON, Image optimizer OFF
(4) Select the layout of the photos as below.
Sticker print:
Stickers x 16
Printing on paper other than sticker:
Bordered x 1, x 2, x 4, x 8
Borderless x 1, x 2, x 4, x 8
Mixed 1, 2, 3
Performing Infrared Communication
You can print photos in your mobile phone.
When printing through infrared communication, also refer to your mobile phone manual.
1 Prepare for printing.
(1) Press [ON/OFF] to turn on the machine.
See “Turning the Machine ON and OFF” on page 17.
(2) Load paper.
See “Loading Paper” on page 19.
(3) Ensure that the proper paper source is selected.
See “Changing the Paper Source” on page 23.
2 Set the print setting.
See “Setting the Page Size, Media Type, and Layout When Printing from a Mobile Phone” on
page 78.
3 Start Infrared Communication.
Note
For information on wireless print compatible page size and type, see
“Recommended Paper and Requirements” on page 19.
Note
z <Mixed 1>, <Mixed 2>, or <Mixed 3> can be selected only when the
page size setting is <8.5" x 11" (215.9 x 279.4)> or <A4>.
z When printing on Canon Photo Stickers, make the settings as below.
Page Size Media Type Layout
Sticker Photo Paper Plus Glossy Stickers x 16
(1)
(2)
(3)
(4)
