Default setup options
Your camera default is set to Automatic (to automatically
search for an available network. You can set this option to
Manual to select a network each time you connect.
➔
Settings
➔
More
settings
➔
Mobile networks
.
1. From the Home screen, tap
2. Tap
Network operators
.
3. Tap
Default setup
.
4. Tap
Manual
to locate and connect to a network
manually, or tap
Automatic
to allow the device to
automatically select a network.
VPN settings
The VPN settings menu allows you to set up and manage
Virtual Private Networks (VPNs).
Important!
Before you can use a VPN you must establish and
configure one.
Before you add a VPN you must determine which VPN
protocol to use: PPTP (Point-to-Point Tunneling Protocol),
L2TP (Layer 2 Tunneling Protocol), L2TP/IPSec PSK (Pre-
shared key based L2TP/IPSec), or L2TP/IPSec CRT
(Certificate based L2TP/IPSec).
1. Bef
ore using VPN, you must first set up a screen unlock
PIN o
r password.
For more information, refer to “Lock
Sc
reen Settings” on page 82.
➔
Settings
➔
More
settings
➔
VPN
.
2. From the Home screen, tap
3. Tap
Add VPN network
.
4. Enter a name for the VPN network in the
Name
field.
5. Select a VPN type from the
Type
drop-down menu.
6. Enter the
Server address
and any other required fields
that are dependent upon the
Type
you entered
previously.
7. Tap the
PPP encryption (MPPE)
check box if desired.
8. Tap the
Show advanced options
check box to display
additional VPN options.
9. Tap
Save
to save your VPN settings.
75
