Alpine IVA-D105 DVD Player User Manual


 
29-EN
+01GB05IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
Blackout Mode On and Off
When Blackout mode is turned on, the monitor display will turn off to
reduce power consumption.
This additional power enhances the sound quality.
1
Press VISUAL on the unit.
The VISUAL selection screen is displayed.
2
Touch [OFF].
The backlit-display portion goes out.
3
Touch [OFF] again to cancel the display backlight.
To apply the setting, set to VISUAL in “Setting the VISUAL Button”
(page 38).
If any button on the unit is pressed during Blackout mode, the
function will be displayed for 5 seconds to show the operation before
returning to Blackout mode.
Setting rear Camera Interruption
When the rear camera is connected, rear pictures are output on the
screen.
1
Select CAMERA in “Setting the AUX Mode”
(page 37).
2
Press VISUAL on the unit.
The VISUAL selection screen is displayed.
3
Touch [CAMERA].
Rear picture is output even if you do not engage the shift
lever in reverse (R).
4
To cancel the setting, press VISUAL on the unit,
and touch [NORMAL].
By shifting to reverse (R),the rear pictures are output. This function is
effective when the reverse wire is properly connected.
DVD Setup Operation
The DVD Setup operation can be carried out after removing the
disc from the unit.
1
Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
2
Touch [] of SOURCE.
The SOURCE SETUP screen appears.
3
Touch [] of DVD.
The DVD setup screen appears.
4
Touch [] or [], etc., of the desired item to change
its setting.
Setting items:
MENU LANGUAGE / AUDIO LANGUAGE / SUBT. LANGUAGE /
COUNTRY CODE / PARENTAL / DIGITAL OUT /
DOWNMIX MODE / TV SCREEN / BONUS CODE /
DVD-A SETUP / DISC PLAY MODE / PLAY MODE / DivX
Information / PBC
Setup
DVD Setup
To display the DVD mode screen:
To watch a video source, your vehicle must be parked with the
ignition key in the ACC or ON position. To do this, follow the
procedure below.
1 Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second
time, release the foot brake.
For automatic transmission vehicles, place the transmission lever
in the Park position.
Now, the locking system for the DVD mode operation has been
released. Engaging the parking brake can reactivate the DVD
mode, as long as the car's ignition has not been turned off. It is
not necessary to repeat the above procedure (1 through 3), of “To
display the DVD mode screen.”
Each time the ignition is turned OFF, perform the procedure of “To
display the DVD mode screen.”
The following steps 1 to 5 are common operations to each
“Setting item” of DVD Setup. Refer to each section for details.
+01GB00IVAD105.book Page 29 Monday, January 15, 2007 4:02 AM